GuitarAmplifierPCBs.com

STINGER TUBE AUDIO, LLC

Home
News
"Baby Will"
SuperLite II
Purchase
Build Information
Photo Gallery
Sound Clips
Previous Versions
Plexi SE PCB
Tweed 5E3 PCB
Jake's QC Stamp
Shock Hazard
Disclaimer of Liability
Contact Us
For Sale


Schematic

SuperLite II Schematic
SuperLite II v2.7 Schematic v3.pdf

Parts List

Here are the parts lists for a complete 18 Watt SuperLite PCB amplifier.  This includes just about everything you will need to build a SuperLite from scratch.  You will need some 600V rated hookup wire, screws, nuts and solder.  Aside from that, it should be in the list.
 
We created two file formats for you, Excel and PDF.  We created PDF versions for those of you that can't open Excel spreadsheets.  Although, the spreadsheet contains hyperlinks to make ordering the parts a snap.

Chassis Layout

Chassis layout for a 16x8x2 (inches) chassis.
While I'm working on the Chassis Layout, you can refer to a photo collection of the SuperLite II.


Drill Plan 


Drill plan for a Scratch Build using a 16x8x2 (inches) blank chassis.

SuperLite II Drill Plan v1.pdf


Build Manual

This manual details how to build the SuperLite II amplifier.

While I'm working on the Build Manual, you can refer to a photo collection of the SuperLite II.



Faceplates


We have created a variety of faceplates to suit your design needs.  All of these faceplates are consistent with thier respective chassis layouts.  These are all formatted for 11x17 inch paper.
 
We recommend BNP Lasers for a high quality laser engraved finish.  We have worked together to create high quality artwork for these faceplates.  When placing an order, refer to GuitarAmplifierPCBs.com.  BNP Lasers already has this artwork in their computers ready to may your faceplates.
 
We recommend the Gloss Gold (922710) plate material, Reverse Etched, with a Black backfill.  The estimated price for two faceplates is $45 + S/H.
 
BNPLasers part numbers:
 
GA-SL-FRONT-00 (SuperLite PCB Front Faceplate)
GA-SL-REAR-00 (SuperLite PCB Rear Faceplate)
 
Each faceplate costs $22.40
 
Here's what the front faceplate looks like.
 
 
And here's the back.
 
 
 
Just in case, here are the files.

Another option is to take the electronic PDF file(s) to a printing company, like Kinkos, and have them print your faceplate on the card stock of your choice.
Make certain the faceplate is printed to scale.  The image can not be scaled or "fit to size" for the graphics to align with the component holes in the chassis layout.

Of course you can print these out yourself with your own printer.  Be aware!  Most printers do not generate prints exactly to scale.  Test your printer by printing a layout drawing and checking the scale of the layout with a ruler.  If the scale is OK, then you can print with assurance that your holes will line up with the faceplate.

 

SuperLite PCB - Scratch build

SuperLite PCB - Scratch Faceplates_Front.pdf

SuperLite PCB - Scratch Faceplates_Back.pdf